Welcome to Key Clamps Online...
Cart 0
DDA Compliant Flush Variable Elbow Key Clamp 42.4mm

DDA-5 Flush Variable Elbow DDA Compliant Key Clamp 42.4mm

£8.95

Flush Variable Elbow | DDA Compliant Key Clamp | 42mm

The DDA-5 Flush Adjustable Elbow key clamp is designed to accommodate for changes in rail direction at a given point in a run of handrail without the requirement for tube bending.  The clamp is designed for use with 42.4mm tube and has been specifically designed for use on a handrail system that is required to comply with the Disability Discrimination Act (DDA) and the Building Regulations Pt. M:2004.

This fitting is most commonly used at the top of wheelchair access ramps to adjust the direction of the handrails from a gradient / slope to a level landing area.

The fitting is designed to be used with 2 no. A009/7 or 2 No. EL/7 internal connectors to achieve a smooth, continuous, handrail.

NB - Please note that these fittings are stocked in a galvanised finish.  In order to meet with the criteria of the regulations (whereby a requirement to 'visually contrast with the surroundings') it is strongly recommended that all components in a DDA compliant handrail system are polyester powder coated.  We offer a powder coating service - please contact us with your requirements.

Click here for further information pertaining to the construction / design of DDA Compliant Handrails.


Share this Product


More from this collection